WEDM is abbreviated English, WEDM also known as cut line.

的简称,是电火花线切割加工英文简写, 电火花线切割加工又称线切割.

互联网

This problems are solved through WEDM ultrasonic vibration of the wire.

通过在线切割加工中附加超声振动,对解决以上问题取得了满意效果.

互联网

A real - time forecasting method of wire electrical - discharge machining ( WEDM ) corner machining accuracy was proposed.

提出了一种电火花线切割加工拐角加工精度的 实时 预测方法,并为此建立了实时预测系统.

互联网

This paper expounds the influence of magnetic field to discharge beam in WEDM.

叙述了线切割加工磁场对放电通道的影响.

互联网

Surface roughness is one of the significant machining characteristics in the finish cut of WEDM.

电火花线切割精加工的表面粗糙度是衡量加工性能的重要指标之一.

互联网

Slots with different depth were made by WEDM metal sheet of ST 12 to simulate slot - type defects.

在ST12冷轧板上用线切割加工出不同深度的狭缝来模拟钢板中缝类缺陷.

互联网

Taking newtype numerical control turntable as the core a WEDM system for complicated surfaces was developed.

开发了以新型翻转式自动分度数控回转工作台为核心的复杂曲面电火花线切割加工系统.

互联网

The main causes leading to electrolysis in WEDM are anodic dis solution and dielectric dissociation.

导致电解锈蚀放电状态的主要原因是阳极金属溶解和工作液电解现象.

互联网

Design the compiler and emluator for planer - type WEDM. Bulit the frame of system.

研究了龙门 式 电火花线切割译码仿真程序,构架了程序框架.

互联网

Give an introduction about programming software EZCODE of WEDM and it's application and it's merits.

通过实例介绍了线切割编程软件EZCODE的应用及其优点.

互联网

Machineability of a metal _ particle _ reinforced material ( 6061 alloy ) by WEDM has been approached.

探讨了采用快走丝电火花线切割机床加工 金属基 颗粒强化材料的可加工性.

互联网

Division I has WEDM. EDM drilling machine, lathe. Milling machines and other devices many Units.

我司有线切割机床.电火花打孔机, 车床. 铣床等设备多台.

互联网

Based on the process property of WEDM, the cause of traveling distance of electrode - wire is analyzed.

针对电火花线切割的工艺特征, 分析加工过程中电极丝偏移量产生的原因.

互联网