Molded - in liner fully supported by valve body at flange seals.

模铸进的衬垫被整体固定在阀体的法兰密封处.

互联网

Beneath the hand wheel are two nuts attached the valve body.

在手轮下面是两个附在阀体上的螺母.

互联网

Valve body and internal parts: anodized aluminum alloy, copper.

阀体和内部零件: 阳极电镀铝合金 、 铜.加固端盖:塑料.

互联网

Seat shall be a non - liner type interlocked to valve body.

阀座应该是无衬垫结构并连锁到阀体上.

互联网

Typically, a control valve body has a close resonancefrequencyto the pipe system.

通常, 控制阀阀体的共振频率和管道系统比较接近.

互联网

Insert valve body through mounting hole and seat lugs.

将阀体插入安装孔和密封连接盘.

互联网

IMPORTANT ! Flow must always be in direction of arrow on valve body.

重要提示! 水流流向必须与阀体上的箭头方向一致.

互联网

Turn handle to be perfectly perpendicular to valve body.

将手柄旋转到与阀体完全垂直的位置.

互联网

Leave the cam assembly clapper parallel to valve body.

使得凸轮总成阀瓣平行于阀体.

互联网

Screw the cover onto the valve body.

将阀盖旋在阀体上.

互联网

Fork Lift , Valve, Body Coupling, Bracket.

供应阀门,叉车起重机, 耦合器, 插座等.

互联网

Electric heat - tape wrap closely together around valve body.

电热交叉缠绕水布紧密地环绕阀体.

互联网

Remove the body bolts from the valve body.

从阀体上拆卸阀体螺栓.

互联网

Electric tape wrap together around valve body.

环绕整个阀体包裹电热带.

互联网

Screw cover onto valve body.

用螺丝将阀盖固定在阀体上.

互联网